GETTING STARTED

Installating your NAKED Filtering Shower Head

You'll be showering in minutes.
And there's no need to call a plumber – we can do this all by ourselves.

for Handheld Showers

Installing NAKED Core

  • Remove your old shower head

    Twist off your old shower head by turning the hose counter-clockwise.

  • Check

    Check your rubber

    Make sure the rubber washer stays in place.

  • Twist on your NAKED Shower Head

    Turning clockwise, twist the shower hose onto NAKED. Hand-tight should be just fine.

Replacing the filter

  • Remove the cover

    Unscrew the cover on the head (twist counter-clockwise).

  • Replace the composite filter

    Give the head a knock to remove the existing filter. Swap the new one in, then replace the head.

  • Unscrew the handle

    Twist counter-clockwise to remove the head.

  • Replace the inline filter

    Twist the head off the handle until you can see the carbon filter. Swap, then twist it back on when you're done.

for Rain Showers

Installing NAKED Halo

  • Remove your old shower head

    Twist off your old shower head by turning it counter-clockwise. If it's too tight, grab the little adjustable wrench that's in the box and give it a half turn to loosen it.

  • Clean your pipes

    With a towel, give the pipe a quick wipe to remove any existing sediment. If there's tape wrapped around the thread, remove that too.

  • Remove the plastic cap

    Unscrew and recycle the plastic cap from the top of your new shower head, and check that the rubber washer is safely in place.

  • Optional

    Optional: remove the red flow restrictor

    We need to include this, but you don't need to. (Make sure to replace the rubber washer).

  • Twist on your NAKED Shower Head

    Turning clockwise, twist on your new shower head. Keep twisting until it's hand-tight, then give it an extra half-turn with the wrench.

  • It's shower time

    Jump straight in. Now you're (truly) naked.

Replacing the filter

  • Unscrew the base

    Hold tight to the top half of the shower head, then twist off the base.

  • Insert the new filter

    Place the new filter onto the base.

  • Twist it back together

    Turning clockwise, twist the base and filter back onto the shower head.